Cisco 7975G - Unified IP Phone VoIP Software Manual Download Page 144 | Manualshive

Page: 144 / 227

background image

7-8

Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)

OL-15790-01

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone

Status Menu

No DNS server IP

A name was specified but DHCP or static IP
configuration did not specify a DNS server
address.

•

If the phone has a static IP address, verify
that the DNS server has been configured.
See the

“Network Configuration Menu”

section on page 4-5

section for details.

•

If you are using DHCP, the DHCP server
has not provided a DNS server. Check the
DHCP server configuration.

Programming Error

The phone failed during programming.

Attempt to resolve this error by power cycling
the phone. If the problem persists, contact Cisco
technical support for additional assistance.

Successful – MD5

The phone attempted an 802.1X transaction and
authentication achieved.

The phone achieved 802.1X authentication.

TFTP access error

TFTP server is pointing to a directory that does
not exist.

•

If you are using DHCP, verify that the
DHCP server is pointing to the correct
TFTP server.

•

If you are using static IP addresses, check
configuration of TFTP server. See the

“Network Configuration Menu” section on
page 4-5

for details on assigning a TFTP

server.

TFTP Error

The phone does not recognize an error code
provided by the TFTP server.

Contact the Cisco TAC.

TFTP file not found

The requested load file (.bin) was not found in
the TFTP directory.

Check the load ID assigned to the phone

(

from

Cisco Unified Communications Manager,
choose

Device > Phone

). Verify that the TFTP

directory contains a .bin

file with this load ID as

the name.

TFTP server not
authorized

The specified TFTP server could not be found in
the phone’s CTL.

•

The DHCP server is not configured
properly and is not server the correct TFTP
server address. In this case, update the
TFTP server configuration to specify the
correct TFTP server.

•

If the phone is using a static IP address, the
phone may be configured with the wrong
TFTP server address. In this case, enter the
correct TFTP server address in the Network
Configuration menu on the phone.

•

If the TFTP server address is correct, there
may be a problem with the CTL file. In this
case, run the CTL client and update the
CTL file, making sure that the proper TFTP
servers are included in this file.

Table 7-2

Status Messages on the Cisco Unified IP Phone 7975G (continued)

Message

Description

Possible Explanation and Action

«
...
142
143
144
145
146
...
»

Summary of Contents for 7975G - Unified IP Phone VoIP




































































































































































































































Reviews:

No comments

Related manuals for 7975G - Unified IP Phone VoIP

Brand: Eads Telecom Pages: 2

Brand: Pantech Pages: 145

Brand: Paradox Pages: 44

Brand: Pantech Pages: 51

Brand: Grandstream Networks Pages: 84

Brand: cromax Pages: 9

Brand: Avaya Pages: 172

Brand: Teldat Pages: 165

Brand: Samsung Pages: 151

Brand: Samsung Pages: 222

Brand: Samsung Pages: 151

Brand: Samsung Pages: 109

Brand: QUO Pages: 9

Brand: Zte Pages: 60

Brand: SoftBank Pages: 24

Brand: HP Pages: 56

Brand: HP Pages: 234

Brand: HP Pages: 99

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands