manualshive.com logo in svg

Cisco 7975G - Unified IP Phone VoIP, Software Manual

The Cisco 7975G - Unified IP Phone VoIP offers cutting-edge communication features for seamless business connections. With its sleek design and intuitive interface, this device ensures crystal-clear voice calls and efficient call management. Access the comprehensive datasheet and user manual for free download on manualshive.com.

Share
Download
background image

 

8-12

Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)

OL-15790-01

Chapter 8      Monitoring the Cisco Unified IP Phone Remotely

Streaming Statistics

Sender Packets

Total number of RTP data packets transmitted by the phone since 
starting this connection. The value is 0 if the connection is set to 
receive only mode.

Sender Octets

Total number of payload octets transmitted in RTP data packets by the 
phone since starting this connection. The value is 0 if the connection 
is set to receive only mode.

Sender Codec

Type of audio encoding used for the transmitted stream.

Sender Reports Sent

1

Number of times the RTCP Sender Reports have been sent.

Sender Report Time Sent

1

Internal time stamp indicating when a RTCP Sender Report was sent.

Rcvr Lost Packets

Total number of RTP data packets that have been lost since starting 
receiving data on this connection. Defined as the number of expected 
packets less the number of packets actually received, where the 
number of received packets includes any that are late or duplicate. The 
value displays as 0 if the connection was set to send-only mode.

Avg Jitter

Estimate of mean deviation of the RTP data packet inter-arrival time, 
measured in milliseconds. The value displays as 0 if the connection 
was set to send-only mode.

Rcvr Codec

Type of audio encoding used for the received stream.

Rcvr Reports Sent

1

Number of times the RTCP Receiver Reports have been sent.

Rcvr Report Time Sent

1

Internal time stamp indicating when a RTCP Receiver Report was sent.

Rcvr Packets

Total number of RTP data packets received by the phone since starting 
receiving data on this connection. Includes packets received from 
different sources if this is a multicast call. The value displays as 0 if 
the connection was set to send-only mode.

Rcvr Octets

Total number of payload octets received in RTP data packets by the 
device since starting reception on the connection. Includes packets 
received from different sources if this is a multicast call. The value 
displays as 0 if the connection was set to send-only mode.

MOS LQK

Score that is an objective estimate of the mean opinion score (MOS) 
for listening quality (LQK) that rates from 5 (excellent) to 1 (bad). 
This score is based on audible concealment events due to frame loss in 
the preceding 8-second interval of the voice stream. For more 
information, see the 

“Monitoring the Voice Quality of Calls” section 

on page 9-16

.

Note

The MOS LQK score can vary based on the type of codec that 
the Cisco Unified IP Phone uses. 

Avg MOS LQK

Average MOS LQK score observed for the entire voice stream.

Min MOS LQK

Lowest MOS LQK score observed from start of the voice stream.

Table 8-5

Streaming Statistics Area Items (continued)

Item

Description

Summary of Contents for 7975G - Unified IP Phone VoIP




































































































































































































































Reviews:

No comments

Related manuals for 7975G - Unified IP Phone VoIP

Hama Freedom Operating Instruction preview
Freedom
Brand: Hama Pages: 12
Yealink W56P Telesystem Quick Start Manual preview
W56P Telesystem
Brand: Yealink Pages: 12
Yealink Verizon One Talk W60B Quick Reference Manual preview
Verizon One Talk W60B
Brand: Yealink Pages: 8
Yealink Telkom W52P Specification preview
Telkom W52P
Brand: Yealink Pages: 2
Yealink T46S Skype for Business Handling Instruction preview
T46S Skype for Business
Brand: Yealink Pages: 2
Yealink VP59 Teams Administrator'S Manual preview
VP59 Teams
Brand: Yealink Pages: 533
Cellon UT5160C User Manual preview
UT5160C
Brand: Cellon Pages: 87
E-MetroTel Nortel IP UC Series Features Manual preview
Nortel IP UC Series
Brand: E-MetroTel Pages: 36
Ericsson CF888 User Manual preview
CF888
Brand: Ericsson Pages: 75
Matrix SPARSH VP710 User Manual preview
SPARSH VP710
Brand: Matrix Pages: 1046
SAIET LINK 4 Manual preview
LINK 4
Brand: SAIET Pages: 76
PCD TE1303MX Manual preview
TE1303MX
Brand: PCD Pages: 73
Mocet IP3093-L Quick Start Manual preview
IP3093-L
Brand: Mocet Pages: 13
Prestigio MultiPhone PAP4505DUO Quick Start Manual preview
MultiPhone PAP4505DUO
Brand: Prestigio Pages: 4
Zte Z353VL User Manual preview
Z353VL
Brand: Zte Pages: 157
Siemens C62 Service Manual preview
C62
Brand: Siemens Pages: 48
Siemens CFX65 Owner'S Manual preview
CFX65
Brand: Siemens Pages: 77
Siemens AL21 Manual preview
AL21
Brand: Siemens Pages: 33

Brands by name

Popular brands

Load more brands