4-19
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
OL-15790-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
UI Configuration Menu
The UI Configuration menu displays the status of various user interface features on the phone.
Table 4-12
describes the options on this menu.
Table 4-12
UI Configuration Menu Options
Option
Description
To Change
Auto Line Select
Indicates whether the phone shifts the call focus
to incoming calls on all lines.
When this option is disabled, the phone only
shifts the call focus to incoming calls on the line
that is in use. When this option is enabled, the
phone shifts the call focus to the line with the
most recent incoming call.
Default: Disabled
From Cisco Unified Communications Manager
Administration, choose
Device > Phone >
Phone Configuration
.
BLF for Call Lists
Indicates whether the Busy Lamp Field (BLF) is
enabled for call lists.
From Cisco Unified Communications Manager
Administration, choose
System > Enterprise
Parameters
.
Reverting Focus Priority Indicates whether the phone shifts the call focus
on the phone screen to an incoming call or a
reverting hold call. Settings include:
Lower
—Focus priority given to incoming calls.
Higher
—Focus priority given to reverting calls.
Even
—Focus priority given to the first call.
From Cisco Unified Communications Manager
Administration, choose
System > Device Pool
.
See also: Hold Reversion.
Auto Call Select
Indicates whether the phone automatically shifts
the call focus to an incoming call on the same
line when the user is already on a call.
When this option is enabled, the phone shifts the
call focus to the most recent incoming call.
When this option is disabled, all automatic focus
changes, including Auto Line Select, are
disabled regardless of their setting.
Default: Enabled
From Cisco Unified Communications Manager
Administration, choose
Device > Phone >
Phone Configuration
.
“more” Softkey Timer
Indicates the number of seconds that additional
softkeys are displayed after the user presses
more
. If this timer expires before the user
presses another softkey, the display reverts to the
initial softkeys.
Range: 5 to 30; 0 represents an infinite timer.
Default: 5
From Cisco Unified Communications Manager
Administration, choose
Device > Phone >
Phone Configuration
.
