manualshive.com logo in svg

Cisco 7975G - Unified IP Phone VoIP, Software Manual

The Cisco 7975G - Unified IP Phone VoIP offers cutting-edge communication features for seamless business connections. With its sleek design and intuitive interface, this device ensures crystal-clear voice calls and efficient call management. Access the comprehensive datasheet and user manual for free download on manualshive.com.

Share
Download
background image

 

6-6

Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)

OL-15790-01

Chapter 6      Customizing the Cisco Unified IP Phone

Configuring Wideband Codec

Note

Cisco recommends that you also store backup copies of custom image files in another location. 
You can use these backup copies if the customized files are overwritten when you upgrade 
Cisco Unified Communications Manager.

Step 4

Use a text editor to edit the List.xml file. See the 

“List.xml File Format Requirements” section on 

page 6-4

 for the location of this file, formatting requirements, and a sample file.

Step 5

Save your modifications and close the List.xml file.

Note

When you upgrade Cisco Unified Communications Manager, a default List.xml file will replace 
your customized List.xml file. After you customize the List.xml file, make a copy of the file and 
store it in another location. After upgrading Cisco Unified Communications Manager, replace 
the default List.xml file with your stored copy.

Step 6

To cache the new List.xml file, stop and start the TFTP service by using Cisco Unified Serviceability or 
disable and reenable the Enable Caching of Constant and Bin Files at Startup TFTP service parameter 
(located in the Advanced Service Parameters).

Configuring Wideband Codec

If Cisco Unified Communications Manager has been configured to use G.722 (G.722 is enabled by 
default for the Cisco Unified IP Phone 7975G) and if the far endpoint supports G.722, the call connects 
by using the G.722 codec in place of G.711. This situation occurs regardless of whether the user has 
enabled a wideband headset or wideband handset, but if either the headset or handset is enabled, the user 
may notice greater audio sensitivity during the call. Greater sensitivity means improved audio clarity but 
also means that more background noise can be heard by the far endpoint—noise such as rustling papers 
or nearby conversations. Even without a wideband headset or handset, some users may prefer the 
additional sensitivity of G.722. Other users may be distracted by the additional sensitivity of G.722.

The following parameters in Cisco Unified Communications Manager Administration affect whether 
wideband is supported for this Cisco Unified Communications Manager server or a specific phone:

  •

Advertise G.722 Codec—From Cisco Unified Communications Manager Administration, choose 

System > Enterprise Parameters

. The default value of this enterprise parameter is True, which 

means that all Cisco Unified IP Phone Series that are registered to this Cisco Unified 
Communications Manager advertise G.722 to Cisco Unified Communications Manager. If each 
endpoint in the attempted call supports G.722 in its capabilities set, Cisco Unified Communications 
Manager chooses that codec for the call.

  •

Advertise G.722 Codec—From Cisco Unified Communications Manager Administration, choose

 

Device > Phone

. The default value for this product-specific parameter is the value that is specified 

in the enterprise parameter. If you want to override this on a per-phone basis, choose Enabled or 
Disabled in the Advertise G.722 Codec parameter on the Product Specific Configuration area of the 
Phone Configuration window.

Summary of Contents for 7975G - Unified IP Phone VoIP




































































































































































































































Reviews:

No comments

Related manuals for 7975G - Unified IP Phone VoIP

8*8 SPA 303 Quick Start Manual preview
SPA 303
Brand: 8*8 Pages: 5
Samsung OFFICESERV 100 Series System Administration & Special Features Manual preview
OFFICESERV 100 Series
Brand: Samsung Pages: 22
Lanix U200 User Manual preview
U200
Brand: Lanix Pages: 13
Lanix L900 User Manual preview
L900
Brand: Lanix Pages: 25
Palm AT&T Treo 680 Starting Manual preview
AT&T Treo 680
Brand: Palm Pages: 52
AGM 2A3DR-H5 Manual preview
2A3DR-H5
Brand: AGM Pages: 11
HTC Sensation 4G T-Mobile Start Manual preview
Sensation 4G T-Mobile
Brand: HTC Pages: 38
Linksys SPA901 User Manual preview
SPA901
Brand: Linksys Pages: 5
Wiko DARKMOON Quick Manual preview
DARKMOON
Brand: Wiko Pages: 98
Cooper Security i-dig02 Installation Manual preview
i-dig02
Brand: Cooper Security Pages: 8
Ericsson CF888 User Manual preview
CF888
Brand: Ericsson Pages: 75
Allview M9 Luna User Manual preview
M9 Luna
Brand: Allview Pages: 88
2N D7A User Manual preview
D7A
Brand: 2N Pages: 180
Verykool I603A User Manual preview
I603A
Brand: Verykool Pages: 33
Doogee LEO DG280 User Manual preview
LEO DG280
Brand: Doogee Pages: 40
Pantech PP4GA-160C User Manual preview
PP4GA-160C
Brand: Pantech Pages: 82
Samsung SM-A145F User Manual preview
SM-A145F
Brand: Samsung Pages: 119
Samsung SM-A155F Repair Manual preview
SM-A155F
Brand: Samsung Pages: 125

Brands by name

Popular brands

Load more brands