manualshive.com logo in svg

Cisco 7975G - Unified IP Phone VoIP, Software Manual

The Cisco 7975G - Unified IP Phone VoIP offers cutting-edge communication features for seamless business connections. With its sleek design and intuitive interface, this device ensures crystal-clear voice calls and efficient call management. Access the comprehensive datasheet and user manual for free download on manualshive.com.

Share
Download
background image

 

2-10

Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)

OL-15790-01

Chapter 2      Preparing to Install the Cisco Unified IP Phone on Your Network

Adding Phones to the Cisco Unified Communications Manager Database

Auto-registration is disabled by default. In some cases, you might not want to use auto-registration; for 
example, if you want to assign a specific directory number to the phone, or if you plan to implement 
authentication or encryption, as described in 

Cisco Unified Communications Manager Security Guide

. 

For information about enabling auto-registration, refer to “Enabling Auto-Registration” in the 

Cisco 

Unified Communications Manager Administration Guide.

 

Note

When you configure the cluster for mixed mode through the Cisco CTL client, auto-registration is 
automatically disabled. When you configure the cluster for non-secure mode through the Cisco CTL 
client, auto-registration is automatically enabled.

Related Topics

  •

Adding Phones with Auto-Registration and TAPS, page 2-10

  •

Adding Phones with Cisco Unified Communications Manager Administration, page 2-11

  •

Adding Phones with BAT, page 2-11

Adding Phones with Auto-Registration and TAPS

You can add phones with auto-registration and TAPS, the Tool for Auto-Registered Phones Support, 
without first gathering MAC addresses from phones.

TAPS works with the Bulk Administration Tool (BAT) to update a batch of phones that were already 
added to the Cisco  Unified  Communications Manager database with dummy MAC addresses. Use TAPS 
to update MAC addresses and download pre-defined configurations for phones.

Note

Cisco recommends you use auto-registration and TAPS to add less than 100 phones to your network. To 
add more than 100 phones to your network, use the Bulk Administration Tool (BAT). See the 

“Adding 

Phones with BAT” section on page 2-11

.

To implement TAPS, you or the end-user dial a TAPS directory number and follow voice prompts. When 
the process is complete, the phone will have downloaded its directory number and other settings, and the 
phone will be updated in Cisco  Unified  Communications Manager Administration with the correct MAC 
address.

Auto-registration must be enabled in Cisco Unified Communications Manager Administration 

 

(

System > Cisco Unified CM

) for TAPS to function.

Note

When you configure the cluster for mixed mode through the Cisco CTL client, auto-registration is 
automatically disabled. When you configure the cluster for non-secure mode through the Cisco CTL 
client, auto-registration is automatically enabled.

Refer to 

Cisco Unified Communications Manager Bulk Administration Guide

 for detailed instructions 

about BAT and about TAPS.

Related Topics

  •

Adding Phones with Auto-Registration, page 2-9

  •

Adding Phones with Cisco Unified Communications Manager Administration, page 2-11

  •

Adding Phones with BAT, page 2-11

Summary of Contents for 7975G - Unified IP Phone VoIP




































































































































































































































Reviews:

No comments

Related manuals for 7975G - Unified IP Phone VoIP

NEC Univerge SV8100 Reference Sheet preview
Univerge SV8100
Brand: NEC Pages: 4
Yealink T5 Series User Manual preview
T5 Series
Brand: Yealink Pages: 229
Samsung SGH-T399 Manual Del Usuario preview
SGH-T399
Brand: Samsung Pages: 343
Alcatel OT-209 User Manual preview
OT-209
Brand: Alcatel Pages: 4
GS-hosted GS-5200 User Manual preview
GS-5200
Brand: GS-hosted Pages: 26
C.R. Laurence C9ASA Installation Instructions preview
C9ASA
Brand: C.R. Laurence Pages: 2
Kyocera Sprint Torcque XT User Manual preview
Sprint Torcque XT
Brand: Kyocera Pages: 209
Manta CTA-5000 User Manual preview
CTA-5000
Brand: Manta Pages: 100
ZTC ZT658 User Manual preview
ZT658
Brand: ZTC Pages: 168
2N D7A User Manual preview
D7A
Brand: 2N Pages: 180
Lephone w21 User Manual preview
w21
Brand: Lephone Pages: 27
Tesla 6.2 LITE Quick Start Manual preview
6.2 LITE
Brand: Tesla Pages: 3
Samsung SM-A505F/DS User Manual preview
SM-A505F/DS
Brand: Samsung Pages: 217
Samsung SM-A507FN/DS User Manual preview
SM-A507FN/DS
Brand: Samsung Pages: 197
Zte F188 User Manual preview
F188
Brand: Zte Pages: 60
Zte Blade Q Maxi Quick Start Manual preview
Blade Q Maxi
Brand: Zte Pages: 256
Geemarc CLEARSOUND ClearText Manual preview
CLEARSOUND ClearText
Brand: Geemarc Pages: 31
GE AU29257 User Manual preview
AU29257
Brand: GE Pages: 2

Brands by name

Popular brands

Load more brands