manualshive.com logo in svg

Cisco 7970G - IP Phone VoIP, Administration Manual, Page: 118 / 301

Share
Download
Cisco 7970G - IP Phone VoIP Administration Manual Download Page 118

 

Chapter 4      Configuring Settings on the Cisco Unified IP Phone

Device Configuration Menu

4-26

Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 

OL-14626-01

NTP Configuration Menu (SIP Phones Only)

The NTP Configuration menu displays information about the NTP server and 
mode configuration used by SIP phones. 

Table 4-10

 describes the options on this 

menu.

Network Locale

Network locale associated with the 
phone user. The network locale 
identifies a set of detailed information 
that supports the phone in a specific 
location, including definitions of the 
tones and cadences used by the phone.

From Cisco Unified Communications 
Manager Administration, choose 

Device > Phone > Phone 
Configuration

.

Network Locale 
Version

Version of the network locale loaded on 
the phone.

Display only—Cannot configure.

NTP Configuration 
(SIP phones only)

Provides access to the NTP 
Configuration Menu. For more 
information, see the 

“NTP 

Configuration Menu (SIP Phones 
Only)” section on page 4-26

Display only—Cannot configure.

Table 4-9

Locale Configuration Menu Options (continued)

Option

Description

To Change

Table 4-10

NTP Configuration Menu Options 

Option

Description

To Change

NTP Server 1

IP address of the primary NTP server.

Display only—Cannot configure.

NTP Server 2

IP address of the secondary or backup 
NTP server.

Display only—Cannot configure.

NTP Mode 1

Primary server mode. Supported modes 
are Directed Broadcast and Unicast.

Display only—Cannot configure.

NTP Mode 2

Secondary server mode. Supported 
modes are Directed Broadcast and 
Unicast.

Display only—Cannot configure.

Summary of Contents for 7970G - IP Phone VoIP














































































































































































































































































































Reviews:

No comments