background image

C H A P T E R

 

4-1

Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 

OL-14626-01

4

Configuring Settings on the Cisco 
Unified IP Phone

The Cisco Unified IP Phone includes many configurable network and device 
settings that you may need to modify before the phone is functional for your users. 
You can access these settings, and change many of them, through menus on the 
phone.

This chapter includes the following topics:

  •

Configuration Menus on the Cisco Unified IP Phone 7970 Series, page 4-1

  •

Overview of Options Configurable from a Phone, page 4-6

  •

Network Configuration Menu, page 4-7

  •

Device Configuration Menu, page 4-16

  •

Security Configuration Menu, page 4-46

Configuration Menus on the Cisco Unified IP Phone 
7970 Series

The Cisco Unified IP Phone includes the following configuration menus:

  •

Network Configuration menu—Provides options for viewing and making a 
variety of network settings. For more information, see the 

“Network 

Configuration Menu” section on page 4-7

.

Summary of Contents for 7970G - IP Phone VoIP














































































































































































































































































































Reviews: