Cisco 7940G Administration Manual Download Page 55

Page: 55 / 184

3-19

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

OL-7890-01

Chapter 3 Initializing Cisco Unified IP Phones

How to Set the Date and Time

Procedure

Step 1

Using an ASCII text editor such as vi, open the SIPDefault.cnf file.

Step 2

Modify the following SNTP parameters as needed:

•

sntp_mode

•

sntp_server

•

time_zone

Step 3

Modify the following common DST parameters as needed:

•

dst_offset

•

dst_auto_adjust

•

dst_start_month

•

dst_stop_month

•

dst_start_time

•

dst_stop_time

Step 4

Do one of the following:

•

Modify the following absolute DST parameters as needed:

–

dst_start_day

–

dst_stop_day

•

Modify the following relative DST parameters as needed:

–

dst_start_day_of_week

–

dst_start_week_of_month

–

dst_stop_day_of_week

–

dst_stop_week_of_month

Step 5

Save the file to the root tftp directory of your TFTP server.

Note

To adjust the phone display to European Day-Month-Year format, add the following entry to the
SIPDefault.cnf file: date_format:D/M/Y.

Summary of Contents for 7940G

























































































































































































Cisco 7940G, Administration Manual, Page: 55 / 184

Search results

Summary of Contents for 7940G

Reviews: