manualshive.com logo in svg

Cisco 7940G, Administration Manual, Page: 172 / 184

Share
Download
Cisco 7940G Administration Manual Download Page 172

 

D-14

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

OL-7890-01

Appendix D      SIP IP Phone Parameters

rfc_2543_hold

(Optional) Determine the SDP that a phone uses to place a remote 
party on hold. If this value is 1, the phone uses the RFC 2543 
method and sets the media address to 0.0.0.0. If this value is 0, the 
phone uses the RFC 3264 style and instructs the other side to be in 
recvonly mode.

Default is 0.

semi_attended_transfer

(Optional) Whether or not the caller can transfer the second leg of 
an attended transfer while the call is ringing.

Valid values are as follows:

•

0—Semi-attended transfer is disabled.

•

1—Semi-attended transfer is enabled.

Default is 1.

services_url

(Optional) URL of the services BTXML files. This URL is accessed 
when the Services button is pressed. For example, use 
services_url: “http://10.10.10.10/CiscoServices/Services.asp.”

sip_invite_retx

(Optional) Maximum number of times that an INVITE request will 
be retransmitted.

Valid value is any positive integer. Default is 6.

sip_max_forwards

(Optional) The phone uses the value specified in this parameter in 
the Max-Forwards header of the SIP requests that it generates.

Default is 70.

sip_retx

(Optional) Maximum number of times that a SIP message other than 
an INVITE request will be retransmitted.

Valid value is any positive integer. Default is 10.

sntp_mode

(Optional) Mode in which the phone listens for the SNTP server.

Valid values are unicast, multicast, anycast, or directedbroadcast. 
Default is anycast

sntp_server

IP address of the SNTP server from which the phone obtains time 
data.

speed_label

x

(Optional) Configures the speed-dial key label. The 

x

 variable is 

from label 2 to label 6. There are five possible labels that can be 
configured on the Cisco IP 7960G but only one on the Cisco 
IP 7940G. The 

x 

variable is a string of up to 15 characters.

Note

This parameter 

cannot 

be set in the configuration file.

speed_line

x

(Optional) Configures the speed-dial keys so that the user can set up 
one-touch dialing. There are five possible numbers that can be 
configured on the Cisco IP 7960G but only one on the 
Cisco IP 7940G. The 

x 

variable is a string of up to 128 bytes.

Note

You 

cannot

 set this parameter in the configuration file.

start_media_port

(Optional) Start RTP range for media.

Range is from 16384 to 32766. Default is 16384.

Table D-1

Configuration File Parameters (continued)

Parameter

Description

Summary of Contents for 7940G

























































































































































































Reviews:

No comments