D-1
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
OL-7890-01
A P P E N D I X
D
SIP IP Phone Parameters
This appendix describes SIP parameters in the SIPDefault.cnf file and the SIP IP phone. Parameters are
in alphabetical order, except in
Table D-4
, which lists parameters in the order that they appear on the
phone. Optional parameters are noted.
Note
Parameters whose descriptions include “phone-specific” should, if used, be included in the
phone-specific configuration file.
Table D-1
Configuration File Parameters
Parameter
Description
anonymous_call_block
(Optional) Configures anonymous call block.
Valid values are as follows:
•
0—Disabled by default, but can be turned on and off using the
user interface. When disabled, anonymous calls are received.
•
1—Enabled by default, but can be turned on and off using the
user interface. When enabled, anonymous calls are rejected
•
2—Disabled permanently and cannot be turned on and off
locally using the user interface. Specify this parameter in the
phone-specific configuration file.
•
3—Enabled permanently and cannot be turned on and off
locally using the user interface. Specify this parameter in the
phone-specific configuration file.
Default is 0.
auto_answer
(Optional) Configures the intercom functionality so that the user
can define one or more of their lines for this feature. It is an integer
field that represents a bit mask of on or off for each line key. The bit
mask reads from the least significant bit of 0 equal to line 1 to the
most significant bit of 5 for line 6.
Valid values are as follows:
•
Cisco Unified IP Phone 7960G — 0 to 63
•
Cisco Unified IP Phone 7940G — 0 to 3
Note
This parameter
cannot
be set in the configuration file.