D-15
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
OL-7890-01
Appendix D SIP IP Phone Parameters
stutter_msg_waiting
(Optional) Enables a stutter dial tone when there is a message
waiting. It is disabled by default.
Valid values are 0 (off) and 1 (on).
sync
(Optional) Value against which to compare the value in the
syncinfo.xml file before a remote reboot is performed. Limited to 32
characters.
telnet_level
(Optional) Enables Telnet for the phone.
Valid values are as follows:
•
0—Disabled.
•
1—Enabled, and no privileged commands can be executed.
•
2—Enabled, and privileged commands can be executed.
Default is 0.
tftp_cfg_dir
Path to the TFTP subdirectory in which phone-specific
configuration files are stored.
Note
This parameter is only required if the phone-specific files
are in a subdirectory and not in the root directory.
time_format_24hr
(Optional) Whether a 12- or 24-hour time format is displayed by
default on the user interface.
Valid values are as follows:
•
0—12-hour format is displayed by default but can be changed
to a 24-hour format using the user interface.
•
1—24-hour format is displayed by default but can be changed
to a 12-hour format using the user interface.
•
2—12-hour format is displayed and cannot be changed to a
24-hour format using the user interface.
•
3—24-hour format is displayed and cannot be changed to a
12-hour format using the user interface.
Default is 1.
time_zone
(Optional) Time zone in which the phone is located.
Valid values are the time-zone abbreviations shown in
Table 3-5 on
page 3-21
. Abbreviations are case sensitive and must be in all
capital letters. Default is PST.
timer_invite_expires
(Optional) Amount of time, in seconds, after which a SIP INVITE
expires. This value is used in the Expire header field.
Valid values are any positive number; however, we recommend 180.
Default is 180.
timer_keepalive_expires
Reserved.
Table D-1
Configuration File Parameters (continued)
Parameter
Description
