D-18
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
OL-7890-01
Appendix D SIP IP Phone Parameters
DHCP Enabled
Whether the phone uses DHCP to configure
network settings (IP address, subnet mask,
domain name, default router list, DNS server list,
and TFTP address).
Valid values are Yes and No. Default is Yes. To
manually configure your IP settings, you must set
this parameter to No.
DHCP Server
IP address of the DHCP server from which the
phone received its IP address and additional
network settings.
DNS Servers 1 to 5
IP address of the DNS server used by the phone to
resolve names to IP addresses. The phone
attempts to use DNS servers 2 to 5 if DNS server
1 is unavailable.
Note
DHCP must be disabled.
Dynamic TFTP Server
IP address of a dynamic TFTP server. After
initially querying the default TFTP server, the
phone rerequests the default and phone-specific
configuration files from the new TFTP server. The
dynamic TFTP server address is not stored in
flash memory.
Erase Configuration
Whether to erase all of the locally defined
network settings on the phone and reset the values
to the defaults.
Valid values are Yes and No. Yes reenables DHCP.
HTTP Proxy Address
IP address of the HTTP proxy server. You can use
either a dotted IP address or a DNS name (a record
only).
HTTP Proxy Port
Number of the outbound proxy port. Default is 80.
IP Address
IP address of the phone that is assigned by DHCP
or is locally configured.
Note
DHCP must be disabled.
MAC Address
Factory-assigned unique 48-bit hexadecimal
MAC address of the phone.
Operational VLAN Id
Unique identifier of the VLAN of which the
phone is a member. This identifier is obtained
through Cisco Discovery Protocol (CDP).
Subnet Mask
IP subnet mask used by the phone. A subnet mask
partitions the IP address into a network and a host
identifier.
Note
DHCP must be disabled.
Table D-2
Network Parameters (continued)
Parameter
Description
