D-6
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
OL-7890-01
Appendix D SIP IP Phone Parameters
dst_start_day_of_week
(Optional) Day of the week on which DST begins.
Valid values are as follows:
•
Any of the following: Sunday or Sun, Monday or Mon, Tuesday
or Tue, Wednesday or Wed, Thursday or Thu, Friday or Fri,
Saturday or Sat, Sunday or Sun
•
1 to 7 (1 is Sunday; 7 is Saturday)
Name of the day is not case-sensitive. In the United States, the
default is Sunday.
dst_start_month
(Optional) Month in which DST starts.
Valid values are the following:
•
January, February, March, April, May, June, July, August,
September, October, November, and December
•
1 to 12, with 1 being January and 12 being December
When the name of a month is specified, the value is not
case-sensitive. In the United States, the default is April.
dst_start_time
(Optional) Time of day on which DST begins.
Valid values are hour/minute (02/00) or hour:minute (02:00). In the
United States, the default is 02:00.
dst_start_week_of_month
(Optional) Week of month in which DST begins. Valid values are
1 to 6 and 8 (1 is the first week; each subsequent number is a
subsequent week; 8 is the last week in the month regardless of
which week the last week is). In the United States, the default is 1.
dst_stop_day
(Optional) Day of the month on which DST ends.
Valid values are as follows:
•
1 to 31 (for the days of the month)
•
0 (ignore this field and use the value in the
dst_stop_day_of_week parameter instead)
Default is 0.
dst_stop_day_of_week
(Optional) Day of the week on which DST ends.
Valid values are Sunday or Sun, Monday or Mon, Tuesday or Tue,
Wednesday or Wed, Thursday or Thu, Friday or Fri, Saturday or Sat,
Sunday or Sun, and 1 to 7, with 1 being Sunday and 7 being
Saturday. When the name of the day is specified, the value is not
case-sensitive. In the United States, the default is Sunday.
dst_stop_month
(Optional) Month in which DST ends.
Valid values are January, February, March, April, May, June, July,
August, September, October, November, and December or 1 to 12
with 1 being January and 12 being December. When the name of a
month is specified, the value is not case-sensitive. In the United
States, the default is October.
Table D-1
Configuration File Parameters (continued)
Parameter
Description
