manualshive.com logo in svg

Cisco 7940G, Administration Manual, Page: 10 / 184

Share
Download
Cisco 7940G Administration Manual Download Page 10

 

x

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

OL-7890-01

Preface

Obtaining Documentation

Tones

•

Telcordia document GR-506-CORE, 

Signaling for Analog Interfaces 

http://telecom-info.telcordia.com

•

Cisco BTS 10200 Softswitch System Description

http://www.cisco.com/univercd/cc/td/doc/pcat/bts10200.htm

Note

Access to the Cisco BTS 10200 Softswitch System technical documentation set is restricted. 
Contact your Cisco representative for access information.

Upgrading Firmware

•

Cisco 7940 and 7960 IP Phones Firmware Upgrade Matrix

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/addprot/mgcp
/frmwrup.htm

•

Cisco IP Phone 7960/40 Release Notes for SIP

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/addprot/sip/rel
note/

Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several 
ways to obtain technical assistance and other technical resources. These sections explain how to obtain 
technical information from Cisco Systems.

Cisco.com

You can access the most current Cisco documentation at this URL:

http://www.cisco.com/techsupport

You can access the Cisco website at this URL:

http://www.cisco.com

You can access international Cisco websites at this URL:

http://www.cisco.com/public/countries_languages.shtml

Product Documentation DVD

Cisco documentation and additional literature are available in the Product Documentation DVD package, 
which may have shipped with your product. The Product Documentation DVD is updated regularly and 
may be more current than printed documentation.

The Product Documentation DVD is a comprehensive library of technical product documentation on 
portable media. The DVD enables you to access multiple versions of hardware and software installation, 
configuration, and command guides for Cisco products and to view technical documentation in HTML. 
With the DVD, you have access to the same documentation that is found on the Cisco website without 
being connected to the Internet. Certain products also have .pdf versions of the documentation available.

Summary of Contents for 7940G

























































































































































































Reviews:

No comments