55-9
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 55 Configuring Generic Online Diagnostics
Running Online Diagnostic Tests
27) TestNetflowInlineRewrite:
Port 1 2
----------
U U
28) TestFabricSnakeForward ----------> .
29) TestFabricSnakeBackward ---------> .
30) TestFibTcam - RESET -------------> U
Router#
This example shows how to display the detailed online diagnostic results:
Router#
show diagnostic result module 1 detail
Current bootup diagnostic level:minimal
Module 1:
Overall Diagnostic Result for Module 1 :PASS
Diagnostic level at card bootup:minimal
Test results:(. = Pass, F = Fail, U = Untested)
___________________________________________________________________________
1) TestScratchRegister -------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 330
Last test execution time ----> May 12 2003 14:49:36
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> May 12 2003 14:49:36
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________________
2) TestSPRPInbandPing --------------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 660
Last test execution time ----> May 12 2003 14:49:38
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> May 12 2003 14:49:38
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________________
3) TestGBICIntegrity:
Port 1 2
----------
U U
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 0
Last test execution time ----> n/a
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> n/a
Total failure count ---------> 0
Consecutive failure count ---> 0
________________________________________________________________________
