41-102
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 41 Configuring PFC QoS
Configuring PFC QoS
This example shows how to map the DSCP values 0 and 1 to threshold 1 in the standard receive queue
for 10-Gigabit Ethernet port 6/1 port 6/1:
Router#
configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#
interface tengigabitethernet 6/1
Router(config-if)#
rcv-queue dscp-map 1 1 0 1
Router(config-if)#
end
Router#
Note
The receive queue mapping is shown in the second “queue thresh dscp-map” displayed by the
show
queueing interface
command.
This example shows how to verify the configuration:
Router#
show queueing interface tengigabitethernet 1/1 | begin queue thresh dscp-map
<...Output Truncated...>
queue thresh dscp-map
---------------------------------------
1 1 0 1 2 3 4 5 6 7 8 9 11 13 15 16 17 19 21 23 25 27 29 31 33 39 41 42 43 44 45 47
1 2
1 3
1 4
2 1 14
2 2 12
2 3 10
2 4
3 1 22
3 2 20
3 3 18
3 4
4 1 24 30
4 2 28
4 3 26
4 4
5 1 32 34 35 36 37 38
5 2
5 3
5 4
6 1 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
6 2
6 3
6 4
7 1
7 2
7 3
7 4
8 1 40 46
8 2
8 3
8 4
<...Output Truncated...>
Router#
