2-16
Catalyst 6500 Series Ethernet Modules Installation Guide
OL-6265-03
Chapter 2 Ethernet Switching Modules
10/100 and 10/100/1000 Ethernet Modules
Software support
•
With Supervisor Engine 2—12.1(19)E1
•
With Supervisor Engine 32—12.2(18)SXF
•
With Supervisor Engine 32 PISA—12.2(18)ZY
•
With Supervisor Engine 720—12.2(18)SXF
•
With Supervisor Engine 720 and WS-F6K-GE48-AF or
WS-F6K48-AF PoE daughter cards—12.2(17d)SXB
(WS-X6148-GE-TX only)
•
With Supervisor Engine 720-10GE—12.2(33)SXH
•
Catalyst OS:
–
WS-X6148-GE-TX—7.6(9)
–
WS-X6148A-GE-TX—8.4(1)
Queues per port
WS-X6148-GE-TX, WS-X6148V-GE-TX, and WS-X6148-GE-45AF:
•
Tx—1p2q2t (per 8 ports)
•
Rx—1p2t (per port)
WS-X6148A-GE-TX and WS-X6148A-GE-45AF:
•
Tx—1p3q8t
•
Rx—1q2t
Chassis/slot restrictions
No chassis or slot restrictions: the module can occupy any slot in any
Catalyst 6500 or Catalyst 6500-E chassis (all variants)
Bus connection
Single connection into the 32-Gbps shared bus (all variants).
Module upgrades available
PoE support
WS-X6148-GE-TX and WS-X6148A-GE-TX:
•
The WS-X6148-GE-TX is field upgradeable with the
WS-F6K-VPWR-GE= daughter card that supports only the Cisco
prestandard.
•
Both the WS-X6148-GE-TX and the WS-X6148A-GE-TX are field
upgradeable with the WS-F6K-GE48-AF= daughter card that supports
both the Cisco prestandard and the IEEE 802.3af standard.
Refer to the
Catalyst 6500 Series Power over Ethernet Daughter Cards
Field-Upgrade Installation Note
for field upgrade procedures.
Refer to Appendix A for additional information on the PoE daughter cards.
Distributed forwarding
support
Not supported.
Pluggable transceivers
support
Not supported.
TDR support
All variants are supported.
Table 2-10
WS-X6148-GE-TX and WS-X6148A-GE-TX Features (continued)
Feature
Description
