Cisco 6513 - Catalyst Switch, Installation Manual

Page: 108 / 254

2-34
Catalyst 6500 Series Ethernet Modules Installation Guide
OL-6265-03
Chapter 2 Ethernet Switching Modules
10/100 and 10/100/1000 Ethernet Modules
WS-X6196-RJ-21 and WS-X6196-21AF Ethernet Modules
The WS-X6196-RJ-21 and the WS-X6196-21AF Ethernet modules, listed in Table 2-21 , provide 96
10/100-Mbps full- or half-duplex ports. Figure 2-10 shows the module front panel.
Figure 2-10 WS-X6196-RJ-21 Switching Module Front Panel
Table 2-22 lists the module features, and Table 2-23 lists the module physical and environmental
specifications.
Note
With the PoE daughter card installed, the WS-X6196-RJ-21 module can support 96 Class 2 (7 W)
devices or 62 Class 3 (15.4 W) devices per module.
Table 2-21 WS-X6196-RJ-21 Modules
Module Description
WS-X6196-RJ-21 Base module without daughter cards installed.
WS-X6196-21AF Base module equipped with a factory-installed
IEEE 802.3af PoE daughter card (WS-F6K-GE48-AF).
WS-X6196-RJ-21
8X12 PORT
10/100 BASE T
ETHERNET SWITCHING MODULE
STATUS
1 49 2 50 3 51 4 52 5 53 6 54 7 55 8 56 9 57 10 58 11 59 12 60 13 61 14 62 15 63 16 64 17 65 18 66 19 67 20 68 21 69 22 70 23 71 24 72 25 73 26 74 27 75 28 76 29 77 30 78 31 79 32 80 33 81 34 82 35 83 36 84 37 85 38 86 39 87 40 88 41 89 42 90 43 91 44 92 45 93 46 94 47 95 48
INLINE POWER
96
1
60
12
49
13
72
24
61
25
84
36
73
37
96
48
85
184595
Table 2-22 WS-X6196-RJ-21 and WS-X6196-21AF Ethernet Modules Features
Feature Description
Ports per module
•
96 ports (both modules). Ports are numbered (left to right)
– Top row of connectors—First connector, ports 1–12; second
connector, ports 13–24; third connector, ports 25–36; fourth
connector, ports 37–48.
–
Bottom row of connectors—First connector, ports 60–49;
second connector, ports 72–61; third connector, ports 73–84;
fourth connector, ports 85–96.
Note The bottom row of four RJ-21 connectors are inverted. The
highest port number for a bottom row connector appears on the
left side of the connector and the connector’s lowest port
number appears on the right side.
Port connector type RJ-21 (both modules)
Cabling distance 328 ft (100 m) over Category 5, 5e, and 6 UTP/STP cable (both
modules)
Buffer size 1.116 MB per port (both modules)