2-25
Catalyst 6500 Series Ethernet Modules Installation Guide
OL-6265-03
Chapter 2 Ethernet Switching Modules
10/100 and 10/100/1000 Ethernet Modules
Software support
•
With Supervisor Engine 2—12.1(12c)E1
•
With Supervisor Engine 32—12.2(18)SXF
•
With Supervisor Engine 32 PISA—12.2(18)ZY
•
With Supervisor Engine 720—12.2(18)SXF (6148A)
•
With Supervisor Engine 720 except with WS-F6K-48-AF PoE
daughter card—12.2(14)SX (6148)
•
With Supervisor Engine 720 and WS-F6K-48-AF PoE daughter
card—12.2(17d)SXB (6148)
•
With Supervisor Engine 720-10GE—12.2(33)SXH
•
Catalyst OS (6148A)—8.4(1)
•
Catalyst OS (6148)—6.4(11) (for software release 6.x); 7.6(9) (for
software release 7.x)
Queues per port
•
WS-X6148-RJ-45, WS-X6148-45AF, and WS-X6148-RJ45V:
–
Tx—1p2q2t per 8 ports
–
Rx—1p2t per port
•
WS-X6148A-RJ-45 and WS-X6148A-45AF:
–
Tx—1p3q8t
–
Rx—1q2t
Chassis/slot restrictions
No chassis or slot restrictions; the module can occupy any slot in any
Catalyst 6500 or Catalyst 6500-E chassis (all variants).
Bus connection
Single connection into the 32-Gbps shared bus (all variants)
Module upgrades available
PoE support
•
WS-X6148-RJ-45—Field upgradeable to the Cisco prestandard
only with the WS-F6K-VPWR-GE= daughter card or both the
Cisco prestandard and the IEEE 802.3af standard by installing the
WS-F6K-GE48-AF= daughter card.
•
WS-X6148A-RJ-45—Field upgradeable to the Cisco prestandard
and the IEEE 802.3af standard by installing the
WS-F6K-GE48-AF= daughter card.
See the
Cisco Catalyst 6500 Series Power over Ethernet Daughter
Cards Field-Upgrade Installation Note
for field upgrade procedures.
See Appendix A for further information on the PoE daughter cards.
Distributed forwarding
support
Not supported.
Table 2-16
WS-X6148-RJ-45 and WS-X6148A-RJ-45 Ethernet Modules Features (continued)
Feature
Description
