4-25
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
78-16527-01
Chapter 4 Initial Configuration Tasks
Configuring Time
-----------------------------------------------
-----------------------------------------------
Step 10
Exit recurring summertime submode:
sensor(config-hos-rec)#
exit
sensor(config-hos)#
exit
Apply Changes:?[yes]:
Step 11
Press
Enter
to apply the changes or type
no
to discard them.
Configuring Non-recurring Summertime Settings
Use the
summertime-option
non-recurring
command to configure the sensor to switch to summer time
settings on a one-time basis. The default is recurring.
To configure the sensor to switch to summertime settings on a one-time basis, follow these steps:
Step 1
Log in to the sensor using an account with administrator privileges.
Step 2
Enter summertime non-recurring submode:
sensor#
configure terminal
sensor(config)#
service host
sensor(config-hos)#
summertime-option non-recurring
Step 3
Enter start summertime submode:
sensor(config-hos-non)#
start-summertime
Step 4
Configure the start summertime parameters:
a.
Type the date you want to start summertime settings:
sensor(config-hos-non-sta)#
date 2004-05-15
The format is yyyy-mm-dd.
b.
Type the time you want to start summertime settings:
sensor(config-hos-non-sta)#
time 12:00:00
The format is hh:mm:ss.
c.
Verify your settings:
sensor(config-hos-non-sta)#
show settings
start-summertime
-----------------------------------------------
date: 2004-05-15
time: 12:00:00
-----------------------------------------------
sensor(config-hos-non-sta)#
Step 5
Enter end summertime submode:
sensor(config-hos-non-sta)#
exit
sensor(config-hos-non)#
end-summertime
