Contents
xxviii
Catalyst 3560 Switch Software Configuration Guide
78-16156-01
Disabling DVMRP Autosummarization
32-48
Adding a Metric Offset to the DVMRP Route
32-48
Monitoring and Maintaining IP Multicast Routing
32-49
Clearing Caches, Tables, and Databases
32-50
Displaying System and Network Statistics
32-50
Monitoring IP Multicast Routing
32-51
C H A P T E R
33
Configuring MSDP
33-1
Understanding MSDP
33-1
MSDP Operation
33-2
MSDP Benefits
33-3
Configuring MSDP
33-4
Default MSDP Configuration
33-4
Configuring a Default MSDP Peer
33-4
Caching Source-Active State
33-6
Requesting Source Information from an MSDP Peer
33-8
Controlling Source Information that Your Switch Originates
33-9
Redistributing Sources
33-9
Filtering Source-Active Request Messages
33-11
Controlling Source Information that Your Switch Forwards
33-12
Using a Filter
33-12
Using TTL to Limit the Multicast Data Sent in SA Messages
33-14
Controlling Source Information that Your Switch Receives
33-14
Configuring an MSDP Mesh Group
33-16
Shutting Down an MSDP Peer
33-16
Including a Bordering PIM Dense-Mode Region in MSDP
33-17
Configuring an Originating Address other than the RP Address
33-18
Monitoring and Maintaining MSDP
33-19
C H A P T E R
34
Configuring Fallback Bridging
34-1
Understanding Fallback Bridging
34-1
Configuring Fallback Bridging
34-2
Default Fallback Bridging Configuration
34-3
Fallback Bridging Configuration Guidelines
34-3
Creating a Bridge Group
34-3
Adjusting Spanning-Tree Parameters
34-5
Changing the VLAN-Bridge Spanning-Tree Priority
34-6
Changing the Interface Priority
34-6
Assigning a Path Cost
34-7
