Cisco 124778, User Manual

Page: 12 / 96

xii
Cisco AC/DC Power System User Guide, R1.0
May 2006
About this Guide
Document Conventions
•
Chapter 2, “System Installation,” provides the unpacking procedure, safety considerations,
installation process, system upgrade information, and initial system startup for the power system.
• Chapter 3, “Component Replacement,” provides maintenance procedures and component
replacement procedures.
•
Chapter 4, “System Operation,” provides procedures for using the XCS control system. This
includes normal system control and monitoring.
• Chapter 5, “System Troubleshooting,” provides troubleshooting procedures.
•
Chapter 6, “System Parts List,” provides a part numbers list for the Cisco AC/DC Power System.
• Appendix A, “Translated Safety Warnings,” provides translations of all the warnings used in this
document.
Document Conventions
This publication uses the following conventions:
Note
Means reader take note . Notes contain helpful suggestions or references to material not covered in the
document.
Caution
Means reader be careful . In this situation, the user might do something that could result in equipment
damage or loss of data.
Convention Application
boldface Commands and keywords in body text.
italic Command input that is supplied by the user.
[ ] Keywords or arguments that appear within square brackets are optional.
{ x | x | x } A choice of keywords (represented by x) appears in braces separated by
vertical bars. The user must select one.
Ctrl The control key. For example, where Ctrl + D is written, hold down the
Control key while pressing the D key.
screen font Examples of information displayed on the screen.
boldface screen font Examples of information that the user must enter.
< > Command parameters that must be replaced by module-specific codes.