C H A P T E R
Installing the Cisco RPS 2-1
2
Installing the Cisco RPS
You can set the Cisco RPS chassis on a desktop or install it in a rack.
Warning
Only trained and qualified personnel should be allowed to install or replace this
equipment.
Warning
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
Warning
Before opening the chassis, disconnect the telephone-network cables to avoid
contact with telephone-network voltages.
Warning
This equipment is intended to be grounded. Ensure that the host is connected to
earth ground during normal use.
Warning
Never defeat the ground conductor or operate the equipment in the absence of a
suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available.
Warning
When installing the unit, the ground connection must always be made first and
disconnected last.
•
Do not work alone if potentially hazardous conditions exist.
•
Never assume that power is disconnected from a circuit. Always check.
rps2 Page 1 Monday, September 14, 1998 8:17 AM
