Connecting Cables 4-7
Connecting Hubs
Step 3
Connect the other end of the one-to-one cable or the two-to-one cable to a
rear-panel connector on the Cisco RPS, as shown in Figure 4-4 and Figure 4-5.
Figure 4-4
Connecting a One-to-One Cable for Quasi-Redundant Power
Figure 4-5
Connecting a Two-to-One Y-Cable for Fully Redundant Power
H9790
AC INPUT 1
100-200 V~ 50/60 Hz
10-5 A 1000 W
AC INPUT 2
100-200 V~ 50/60 Hz
10-5 A 1000 W
DC OUTPUT 1
DC OUTPUT 2
DC OUTPUT 3
DC OUTPUT 4
H9791
AC INPUT 1
100-200 V~ 50/60 Hz
10-5 A 1000 W
AC INPUT 2
100-200 V~ 50/60 Hz
10-5 A 1000 W
DC OUTPUT 1
DC OUTPUT 2
DC OUTPUT 3
DC OUTPUT 4
rps4 Page 7 Monday, September 14, 1998 8:19 AM
