8-26
P/N 11934-003
Section 8
Cirrus Design
Handling, Servicing, Maintenance
SR20
Windscreen and Windows
Before cleaning an acrylic window, rinse away all dirt particles before
applying cloth or chamois. Never rub dry acrylic. Dull or scratched
window coverings may be polished using a special acrylic polishing
paste.
• Caution •
Use only clean acrylic windows with a solvent free, none
abrasive, antistatic acrylic cleaner. Do not use gasoline,
alcohol, benzene, carbon tetrachloride, thinner, acetone, or
glass window cleaning sprays.
Use only a nonabrasive cotton cloth or genuine chamois to
clean acrylic windows. Paper towel or newspaper are highly
abrasive and will cause hairline scratches.
1.
Remove grease or oil using a soft cloth saturated with kerosene
then rinse with clean, fresh water.
• Note •
Wiping with a circular motion can cause glare rings. Use an up
and down wiping motion to prevent this.
To prevent scratching from dirt that has accumulated on the
cloth, fold cloth to expose a clean area after each pass.
2.
Using a moist cloth or chamois, gently wipe the windows clean of
all contaminates.
3.
Apply acrylic cleaner to one area at a time, then wipe away with a
soft, cotton cloth.
4.
Dry the windows using a dry nonabrasive cotton cloth or chamois.
Revision A3
Summary of Contents for SR20
Page 10: ...1 2 P N 11934 003 Section 1 Cirrus Design General SR20 Intentionally Left Blank Revision A3 ...
Page 22: ...2 2 P N 11934 003 Section 2 Cirrus Design Limitations SR20 Placards 2 21 Revision A6 ...
Page 308: ...9 2 P N 11934 003 Section 9 Cirrus Design Supplements SR20 Intentionally Left Blank Reissue A ...