2-6
P/N 11934-003
Section 2
Cirrus Design
Limitations
SR20
Power Plant Limitations
Engine
Teledyne Continental ............................................................ IO-360-ES
Power Rating ........................................................ 200 hp @ 2700 rpm
Maximum RPM .......................................................................2700 rpm
Oil:
Oil Temperature..................................... 240
°
F (115
°
C) maximum
Oil Pressure:
Minimum................................................................................ 10 psi
Maximum............................................................................. 100 psi
Approved Oils:
Engine Break-In:
For first 25 hours of operation or until oil
consumption stabilizes use straight mineral oil conforming to MIL-
L-6082. If engine oil must be added to the factory installed oil, add
only MIL-L-6082 straight mineral oil.
After Engine Break-In:
Use only oils conforming to Teledyne
Continental Specification MHS-24 (Ashless Dispersant Lubrication
Oil) or MHS-25 (Synthetic Lubrication Oil).
Refer to Section 8 - Oil
Servicing.
Oil viscosity range as follows:
All Temperatures ..............................................15W-50 or 20W-50
Below 40
°
F (4
°
C) ............................................ SAE 30 or 10W-30
Above 40
°
F (4
°
C) ..............................................................SAE 50
Fuel Grade ................ Aviation Grade 100 LL (Blue) or 100 (green)
• Note •
Refer to General Limitations – Fuel Limits
in this section for
operational limitations regarding fuel and fuel storage.
Revision A5
Summary of Contents for SR20
Page 10: ...1 2 P N 11934 003 Section 1 Cirrus Design General SR20 Intentionally Left Blank Revision A3 ...
Page 22: ...2 2 P N 11934 003 Section 2 Cirrus Design Limitations SR20 Placards 2 21 Revision A6 ...
Page 308: ...9 2 P N 11934 003 Section 9 Cirrus Design Supplements SR20 Intentionally Left Blank Reissue A ...