Circutor AFQm-3WF-030M-480, Instruction Manual

Page: 76 / 116

76
AFQm
Instruction Manual
7�11�- ETHERNET COMMUNICATIONS
The Ethernet communication parameters are configured in this screen,
Figure 80
:
Figure 80: Configuration screen: Ethernet communications�
By activating the DHCP option , the device assigns the IP automatically.
If this option is not activated, the parameters must be configured manually:
● IP Address,
IP address.
●
Netmask, subnet mask.
● Gateway,
gateway.
Press the key to access the next configuration step
Press the key to access the main screen of the device without saving the configuration values.
7�12�- RS-485 COMMUNICATIONS
The RS-485 communications configuration in AFQm models is set to a Baud rate of 9600 bps, 8 data
bits, 1 stop bit and no parity. Only the device’s Modbus address can be configured,
Figure 81
.
Figure 81: Configuration screen: RS-485 communications�
● Modbus device,
modbus address.