Circutor AFQm-3WF-030M-480, Instruction Manual

Page: 27 / 116

27
Instruction Manual
AFQm
11
Figure 19:AFQm cabinet-type earth terminal�
Table 14:List of terminals�
Device terminals
1: S1, Current input L1 6: S2 , Current input L3
2: S2
, Current inpu
t
L1
7: L1
, Mains connection L1
3: S1, Current input L2 8: L2 , Mains connection L2
4: S2 , Current input L2 9: L3 , Mains connection L3
5: S1,
Current input L3
10: N
, Mains connection N
11:
Earth connection
3�6�4�- CABINET-TYPE AFQm: AFQm-xxx-070C, AFQm-xxx-140C, AFQm-xxx-210C AND AFQm-xxx-
280C
There are sliding windows at the bottom of the cabinet so that the connection wiring can be slotted
inside,
Figure 14
. These windows can be removed and machined if it is considered necessary to use a
cable gland.
You should never remove the cover closest to the front part.
The current input and the communication ports must be connected to the “ master ” device, which is
the located at the top of the cabinet. This connection is described in “
3.6.2.- RACK-TYPE AFQm: AFQm-
xxx-100R
”.
To access the current input and mains connections, loosen the screws in the lower front cover
Figure
20
.
30