12
The rotary encoder control knobs have fine and coarse tuning with clicking move-
ment. Push the knobs to toggle between coarse and fine tuning, notice the subtle
changes in brightness of related LED. Adjust the knobs to your desired values by
trying coarse and fine tuning. The display will resume its normal brightness after
few seconds to confirm your adjustment.
7.4 Using the control knobs
7.5
Connect the equipment to the power supply. Red (+) is connected to the
positive polarity input of the equipment and Black (-) is connected to the nega-
tive polarity input of the equipment.
7.6
Switch ON the power supply first and the panel meter & green CV Indicator
should light up again.
7.7
Switch ON the equipment and the panel meter & green CV Indicator should
still remain in green.
7.8
You can now operate the equipment. NOTE: When an operation is com-
plete, switch off the equipment first and then switch off the power supply.
Summary of Contents for PSC-6916
Page 2: ...2 PSC 6916 6932 6960 08R14...
Page 31: ...31 Notes...
