16
9.3 Remote Output ON/OFF Control
A. By default, Pin 5 is open and output is ON.
B. Shorting Pin 5 to Pin 4 (ground) and output is off.
C. When output is off, the C.V. & C.C. LED will flash. The current output volt-
age and current setting will show on the panel meter.
D. You also can adjust the output by voltage & current control knob to your
desired value when output is off.
This remote output on/off control can be activated in any of the modes Normal,
Preset, Remote and Set mode.
NOTE: using the 8pin remote plug provided and connect with 22AWG wires.
Pin numbers are
marked on the
black portion.
The allowable fastest switching On/Off frequency is two times per second. When
the On/Off frequency is over two per second, the power supply may not work
normally and protections may be triggered.
CAUTION
Summary of Contents for PSC-6916
Page 2: ...2 PSC 6916 6932 6960 08R14...
Page 31: ...31 Notes...
