15
9.2 Method B: Using two 0 – 5K Ohm variable resistors
Remote Socket Pin Assignment for variable resistor
PIN
FUNCTIONS
REMARKS
1
Internal DC +5V
Resistor end
2
Voltage Adjust
Variable part of resistor
3
Current Adjust
Variable part of resistor
4
Ground
Another resistor end
5
Output OFF
Short to Ground
6
N.A.
7
N.A.
8
N.A.
CC current setting by remote control.
Short circuit the main output with
12AWG
wire.
Adjust the CC current setting using the 0-5k Ohm variable resistor.
Output voltage setting by remote control
Check the output voltage range of the power supply by adjusting the 5Kohm
variable resistor.
Two variable resistors
must be set up at the same time in order for the remote
control to be functional.
Summary of Contents for PSC-6916
Page 2: ...2 PSC 6916 6932 6960 08R14...
Page 31: ...31 Notes...