OG_MU2-ESP_v10e
11
Circuit Design, Inc.
OPERATION GUIDE
■
2.2.4
Transmission data auto assignment panel
1
6
5
3
4
2
[1] Transmit command selector
Selects one of the transmit commands the MU-2-R has. The data transmit command 1 uses a format where the
transmit command refer to the Destination ID before sending data. With the data transmit command 1, the relay
function can not be used nor can the ACK response be returned.
The data transmit command 3 attaches the RSSI level of the receive signal to the response returned.
[2] Route reference
Determines the way to make the transmit command reference the route information.
[3] Refer to route register
Checking this item and clicking the “Assign” button [5] makes the transmit command reference the content of the
route register before being sent. The DT command option character is ‘/R’.
[4] Directly enter route information
Checking this item and clicking the “Assign” button [5] attaches the route information set with the route setting
panel to the transmit command.
[5] Transmission data assignment button
Clicking this button opens the transmission data auto assignment form. The assigned data is displayed in the data
input line 1.
[6] Use ACK response checkbox
Uses a format where the transmit command requires an ACK response from the target station when a data packet
is transmitted. The DT command option character is ‘/A’.
■
2.2.5 Set route information panel
1
2
3
[1] Set to route register button
Writes route information set with the route setting panel in the route register. Transmission is based on the content
of the route register and does not depend on the Destination ID.
[2] Disable route register button
Disables the route register (set to NA). Clears the content of the route register and ensures that data is transmitted
based on the Destination ID.
[3] Attach to the data input line 1 button
You can attach the route information set with the route setting panel to the command entered in the data input line
1.
