OG_MU2-ESP_v10e
29
Circuit Design, Inc.
OPERATION GUIDE
1
10
2
3
9
8
7
6
5
4
[1] Save settings button
Saves the settings as an initialization file. The settings are used when you next start up the program.
[2] OK button
Applies the changed parameters. The changes are not saved in the initialization file.
[3] Cancel button
[4] Edit enable checkbox
The MU-2-R normally operates with just the port and baud rate specified, but you can change the other
parameters for testing and the like.
[5] to [10] COM port parameter input fields
The initial values (MU-2-R specification) are as follows.
Port: COM1, baud rate = 19,200 bps, data bit = 8, stop bit = 1,
parity bit = None, flow control: Hardware
Keep the settings within the specifications of the MU-2-R.
2.5 COM Port Setup Dialogue
Note
