OG_MU2-ESP_v10e
3
Circuit Design, Inc.
OPERATION GUIDE
The
MU-2-R Evaluation Software Program: MU2-ESP
is a dedicated program for evaluation of the MU-2-R series of
products. It includes a control window and test window for issuing commands for evaluation purposes, testing
samples, an air monitor function, various test functions and so on. Using the air monitor function during product
development allows you to optimize the equipment. In addition, you can create graphical reports when conducting
field tests.
With the test functions, it is possible to check the field status such as the RSSI level where the equipment is placed,
the packet success rate and so on using a local PC.
Caution: This program cannot control equipment other than the MU-2-R series of products.
This Operation Guide is for the equipment using the MU-2-R 434MHz.
Terminology used in this Operation Guide and the MU-2-R series product Operation Guides may be written as
follows.
1. When referring to products, “MU-2-R” may be used to represent the MU-2-R series of products. This should be
understood as referring to the version you own.
2. The “setup disk” is the CD-ROM that comes with the MU-2-R series kit that is used for setup.
Product name: MU-2-R Evaluation Software Program
Part number: MU2-ESP
Operating system: Windows Vista, XP, 2000
Recommended CPU operating speed: 400 MHz or higher
Recommended display: XGA (1024 x 768 pixels) or higher
Hard disk capacity: 5 MB
Pointing device: Mouse etc.
Some RS232C-USB converters do not work properly due to problems with the virtual COM port driver or for
other reasons. In this case, use a conventional COM port.
Borland Developer Studio 2006 , Delphi
Components used: Naichal: PREPRE electronic signboard component
Maker’s URL: http://www.geocities.jp/nai_777/free/index.htm
Chapter 1 MU2-ESP
1.1 Outline
1.2 Terminology
1.3 Product Name and Part Number
1.4 Operating Environment of the Program
1.5 Program Development Language
