OG_MU2-ESP_v10e
17
Circuit Design, Inc.
OPERATION GUIDE
[10] Interval actual time
The time until all sent packet data returns.
[11] Get interval button (2)
By clicking this button you can acquire the packet transmission timing of the current system.
[12] Reset button
Reset if the interval cannot be acquired. Check the settings of the relay stations and so on.
[13] Help
Help for the packet success rate test method of measurement.
■
2.2.12 Setting value acquisition panel
On the setting value acquisition panel it is possible to acquire the internal setting values of the source station, relay
station, and target station units. Before acquiring the settings, specify the route information on the route setting panel.
If the route information is not set, the setting of the Destination ID will be acquired.
[1] Display area for internal setting values
Acquires and shows the various parameters of the MU-2-R units.
[2] Source station part
The source station internal setting values field.
[3] Target station part
The target station internal setting values field.
[4] Internal setting values
The display area for internal setting values. Clicking this displays the content in a cursor pop up.
[5] Button for acquiring source station values
Acquires the source station internal setting values.
[6] Button for acquiring target station values
Acquires the target station internal setting values.
[7] Clear all button
Clears the internal setting values display area.
[8] Help
Help for acquiring internal setting values.
5
3
8
7
6
2
4
1
