CIRCONTROL, S.A.
Tel.: +34 937 362 940
Web: www.circo
UNE EN 61851-1:
Electric Vehicle Conductive Charging System. Part 1: General
requirements.
UNE
EN
61851-21:
Part 21: Requirements of the electric vehicle for its conductive connection to the
in
A.C. and D.C.
UNE
EN
61851-22:
Part 22: A.C. charging station for electric
Other Standards: IEC61000, IEC60364
ISO14443A
In accordance with these Standards, the MULTIPOINT SYSTEM has been designed
for MODE1 charging system, as described in the 61851 Standard:
system with 30mA sensitivity is obligated for these systems.
Vehicles cannot
installed.
This unit has been designed for outdoor use. It has an IP
accordance with ANSI/IEC 60529
CIRCONTROL, S.A. – Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940 – Fax: +34 937 362 941
rcontrol.com – E-mail:
Electric Vehicle Conductive Charging System. Part 1: General
21:
Electric
Vehicle
Conductive
Charging
System.
Part 21: Requirements of the electric vehicle for its conductive connection to the
22:
Electric
Vehicle
Conductive
Charging
System.
Part 22: A.C. charging station for electric vehicles.
Other Standards: IEC61000, IEC60364-4-41, IEC60884-1, IEC61010, UNE
In accordance with these Standards, the MULTIPOINT SYSTEM has been designed
charging system, as described in the 61851 Standard:
system with 30mA sensitivity is obligated for these systems.
be charged if these systems are not
This unit has been designed for outdoor use. It has an IP65 protection degree, in
accordance with ANSI/IEC 60529-2004.
Viladecavalls (Barcelona)
6
Electric Vehicle Conductive Charging System. Part 1: General
ectric
Vehicle
Conductive
Charging
System.
Part 21: Requirements of the electric vehicle for its conductive connection to the main
Electric
Vehicle
Conductive
Charging
System.
1, IEC61010, UNE-EN55011,
In accordance with these Standards, the MULTIPOINT SYSTEM has been designed
system with 30mA sensitivity is obligated for these systems.
be charged if these systems are not
protection degree, in
