CIRCONTROL, S.A.
Tel.: +34 937 362 940
Web: www.circo
6.7
Auto-diagnostic. Display code
The information that appears briefly in the card reader display shows the firmware
version number, i.e. 29 is version 2.9.
Errors "E1, E2, E4" have automatic recovery.
8 8
9 9
L
2 9
H
o
L
H
-
o
.
E 4
E 2
E 3
r C
E 1
.
-
Software version is displayed for 1 second after unit is connected to the electrical supply
Indicates credit avalible when the RFID card is presented to the card reader. Example '88'
When the credit number is flashing '99' this indicates that the credit value is greater than 99
Socket 1. Allows charging regardless of avaliable credit. This option only works with a suitably
formatted card and the correct software upgrade in the charging equipment
Socket 2. Allows charging regardless of avaliable credit. This option only works with a suitably
formatted card and the correct software upgrade in the charging equipment
Socket 1. 'H' indicates that the charging unit has reached the preset time limit. This feature can
be enabled or disabled by the factory using the charging equipment software
Socket 2. 'H' indicates that the charging unit has reached the preset time limit. This feature can
be enabled or disabled by the factory using the charging equipment software
Socket 1. '0' flashing indicates the charging unit has reached the preset time allowed for a
minimum charge
Socket 2. '0' flashing indicates the charging unit has reached the preset time allowed for a
minimum charge
It draws a card of the channel 1, properly updated or insert a card that is not correct
RFID Reader unable to read card
Not Used
RFID Reader unable to write to card
It draws a card of the channel 2, properly updated or insert a card that is not correct
Socket 1. A segment fixed in one position indicates there is no load. When the segment is
rotating it indicates charging. The speed of the rotation indicates the amount of load
Socket 2. A segment fixed in one position indicates there is no load. When the segment is
rotating it indicates charging. The speed of the rotation indicates the amount of load
Credit recovery failed in a previous cycle. Reset the system
Communication failed with RFID card reader
CIRCONTROL, S.A. – Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940 – Fax: +34 937 362 941
rcontrol.com – E-mail:
Display code
The information that appears briefly in the card reader display shows the firmware
version number, i.e. 29 is version 2.9.
Errors "E1, E2, E4" have automatic recovery.
Software version is displayed for 1 second after unit is connected to the electrical supply
Indicates credit avalible when the RFID card is presented to the card reader. Example '88'
When the credit number is flashing '99' this indicates that the credit value is greater than 99
Socket 1. Allows charging regardless of avaliable credit. This option only works with a suitably
formatted card and the correct software upgrade in the charging equipment
Socket 2. Allows charging regardless of avaliable credit. This option only works with a suitably
formatted card and the correct software upgrade in the charging equipment
Socket 1. 'H' indicates that the charging unit has reached the preset time limit. This feature can
be enabled or disabled by the factory using the charging equipment software
Socket 2. 'H' indicates that the charging unit has reached the preset time limit. This feature can
be enabled or disabled by the factory using the charging equipment software
Socket 1. '0' flashing indicates the charging unit has reached the preset time allowed for a
Socket 2. '0' flashing indicates the charging unit has reached the preset time allowed for a
It draws a card of the channel 1, properly updated or insert a card that is not correct
RFID Reader unable to read card
RFID Reader unable to write to card
It draws a card of the channel 2, properly updated or insert a card that is not correct
Socket 1. A segment fixed in one position indicates there is no load. When the segment is
rotating it indicates charging. The speed of the rotation indicates the amount of load
Socket 2. A segment fixed in one position indicates there is no load. When the segment is
rotating it indicates charging. The speed of the rotation indicates the amount of load
Credit recovery failed in a previous cycle. Reset the system
Communication failed with RFID card reader
Viladecavalls (Barcelona)
22
The information that appears briefly in the card reader display shows the firmware
Software version is displayed for 1 second after unit is connected to the electrical supply
Indicates credit avalible when the RFID card is presented to the card reader. Example '88'
When the credit number is flashing '99' this indicates that the credit value is greater than 99
Socket 1. Allows charging regardless of avaliable credit. This option only works with a suitably
Socket 2. Allows charging regardless of avaliable credit. This option only works with a suitably
Socket 1. 'H' indicates that the charging unit has reached the preset time limit. This feature can
Socket 2. 'H' indicates that the charging unit has reached the preset time limit. This feature can
Socket 1. '0' flashing indicates the charging unit has reached the preset time allowed for a
Socket 2. '0' flashing indicates the charging unit has reached the preset time allowed for a
It draws a card of the channel 1, properly updated or insert a card that is not correct
It draws a card of the channel 2, properly updated or insert a card that is not correct
Socket 1. A segment fixed in one position indicates there is no load. When the segment is
rotating it indicates charging. The speed of the rotation indicates the amount of load
Socket 2. A segment fixed in one position indicates there is no load. When the segment is
rotating it indicates charging. The speed of the rotation indicates the amount of load
