CIRCONTROL, S.A.
Tel.: +34 937 362 940
Web: www.circo
6.2
Disassembly
To get access inside the
depending on model, with Allen screws.
Once CCL-CP2 is opened the electrical devices ar
guidance system hat.
To continue with the removal, follow the following sequence:
1.
Disconnect the power supply before disconnect electrical intervention. Only
trained personnel are authorized, and with the precautions and ap
personal protective equipment.
2.
If it’s not possibly to take the whole power supply, for example because there
are others posts on charge, disconnect the power supply from local area
through de RCCB.
3.
ATENTION WITH THE DISCONNECTION PROCESS!
a. Press the test button. This test will show if the
(sensibility). Is recommended to do in each intervention.
b. If the RCCB
trained personnel. Remember that the test button does not
residual circuit breaker is not powered.
c. Remember that the
be careful to avoid manipulation closer it. Do not do any operation if
there are faulty cables, insulation damage or vulnerability of a
liable to be powered.
4.
Disconnect the ground cable.
NOTE: Must use Allen wrench to screw supplied appliances for proper maintenance
and do not cause premature degradation
CIRCONTROL, S.A. – Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940 – Fax: +34 937 362 941
rcontrol.com – E-mail:
To get access inside the
CCL-CP1E/B
charger is necessary to open the back
depending on model, with Allen screws.
is opened the electrical devices are able to be manipulated and the
To continue with the removal, follow the following sequence:
Disconnect the power supply before disconnect electrical intervention. Only
trained personnel are authorized, and with the precautions and ap
personal protective equipment.
If it’s not possibly to take the whole power supply, for example because there
are others posts on charge, disconnect the power supply from local area
ATENTION WITH THE DISCONNECTION PROCESS!
ress the test button. This test will show if the RCCB
(sensibility). Is recommended to do in each intervention.
RCCB has not jumped, stop until the fault has been repaired by
trained personnel. Remember that the test button does not
residual circuit breaker is not powered.
Remember that the RCCB input terminals can be powered so it has to
be careful to avoid manipulation closer it. Do not do any operation if
there are faulty cables, insulation damage or vulnerability of a
liable to be powered.
Disconnect the ground cable.
Must use Allen wrench to screw supplied appliances for proper maintenance
and do not cause premature degradation.
Viladecavalls (Barcelona)
17
charger is necessary to open the back lid,
e able to be manipulated and the
Disconnect the power supply before disconnect electrical intervention. Only
trained personnel are authorized, and with the precautions and appropriate
If it’s not possibly to take the whole power supply, for example because there
are others posts on charge, disconnect the power supply from local area
RCCB works correctly
(sensibility). Is recommended to do in each intervention.
has not jumped, stop until the fault has been repaired by
trained personnel. Remember that the test button does not work if the
input terminals can be powered so it has to
be careful to avoid manipulation closer it. Do not do any operation if
there are faulty cables, insulation damage or vulnerability of any party
Must use Allen wrench to screw supplied appliances for proper maintenance
