CIRCONTROL, S.A.
Tel.: +34 937 362 940
Web: www.circo
5.3
Missing credit operative
5.3.1
Start of charge cycle
1. Present the RFID card
2. After a while it displays the
3. If the credit is not correct, the display show “00”
new cycle.
4. Remove the card.
5.3.2
Display indications
“rC” – Credit retrieve.
“Ex” – Error x.
“ . ” – Channel indication that it is
card for this channel.
“O” – The output is on charge
standing.
5.4
Charge operation for Model without RFID reader CCL
MOD3.
1.
Once unit is powered , please verify unit is ready to work.
2.
Plug connector Type 2
CIRCONTROL, S.A. – Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940 – Fax: +34 937 362 941
rcontrol.com – E-mail:
Missing credit operative
Start of charge cycle
card to the reader.
displays the credit value.
If the credit is not correct, the display show “00”€ during 2s and doesn’t start any
Display indications
Channel indication that it is on resting time. (During this time there is no reading
card for this channel.
The output is on charge cycle if oscillates vertically.
Stationary cycle, while
Charge operation for Model without RFID reader CCL
powered , please verify unit is ready to work.
Plug connector Type 2 to the unit and connect other side to Electrical Vehicle
6
1. Green indicator lights in the
marker.
Unit is ready for charging.
1. Unit will start with safety
communications between car and unit.
2. CHARGE indicator light
Stop charge mode unplugging Type 2
connector from the unit.
Viladecavalls (Barcelona)
15
doesn’t start any
on resting time. (During this time there is no reading
Stationary cycle, while
Charge operation for Model without RFID reader CCL-CP1EB
to the unit and connect other side to Electrical Vehicle
s in the
Unit will start with safety
between car and unit.
2. CHARGE indicator lights, charge starts.
Stop charge mode unplugging Type 2
connector from the unit.
