28
SmartMonitor 2 PS Parents’ Guide
SpO
2
%
%
Step 3: Connect the Lead Wires to the ECG Patient Cable.
The larger end of the
ECG patient cable has three openings, marked
LA
(black),
RL
(green) and
RA
(white).
•
Take the white lead wire, and insert it into the opening marked RA.
•
Take the black lead wire, and insert it into the opening marked LA.
•
Firmly push each lead wire in until the socket snaps into place.
CAUTION:
When you need to remove a lead wire, grasp and pull at the strain relief area located near the connecting tip. Do
not grasp the wire.
NOTE:
Use of the third (green - RL) electrode and lead wire is normally not required but may help reduce excessive false low heart
rate alarms.
