42
SmartMonitor 2 PS Parents’ Guide
i
f
this
light
is
on
...
a
nd
this
condition
exists
...
i
t
means
...
Loose Lead
Continuous yellow light and
continuous alarm
The yellow loose lead light and the alarm may sound continuously when there is a problem
with any of the following:
•
lead wires
•
electrodes
•
electrode belt
•
patient cable
•
connections between the child’s skin and the electrodes, the lead wires, the patient cable
and the device
Loose Lead
Continuous yellow light and
no alarm
If you correct the problem, the alarm will stop. However, the yellow light remains on until you
press the RESET button.
Power
Continuous green light,
continuous alarm, with no
other lights lit.
Check the display on the bottom of the monitor for error messages.
If no error messages, the monitor was turned off improperly causing a sibling alarm.
To resolve:
•
Press and hold the blue RESET button.
•
Press and release the gray POWER button.
•
Wait 2 seconds then release the RESET button.
All Lights
All lights are blinking and the
alarm sounds for 3 seconds
and then off for 1 second.
Check the display at the bottom of the monitor for error messages. If there is an error message,
enter it in on your log sheet.
Turn the monitor off and then back on. If the monitor functions normally, continue to use the
monitor.
If your monitor does not function normally, contact your home care provider to service the
monitor.
