Setup & Configuration
HDE-VoIP Telephones
Page 31
8.7. Configure the Autoprovisioning Parameters
Every phone that needs auto-provisioning has to have its auto-provisioning file set up.
The auto-provisioning of a HDE-VoIP phone is done as follows:
1. Create an auto-provision template of the phone.
•
Go to Import/Export Settings near the bottom of the page on the Home Page.
•
Select Export Configuration; the device will prompt with Save options.
•
Using an appropriate editor such as WordPad or XML modify the parameters of the file.
2.
Open and edit the template to change the features of the phone.
3. Save and rename the file as desired with a file extension of .xml or .txt. For example, if the
phone has a MAC address of 00:20:f7:01:0f:22 the auto-provisioning file of this particular
device/phone could be saved as 0020f7010f22.xml.
4.
Click the Autoprovisioning button to open the Autoprovisioning Configuration page (Figure 12).
Figure 12 - Autoprovisioning Configuration Page
On the
Autoprovisioning Configuration
page, you may enter values for the parameters indicated in Table 9.
Follow the instructions in the Guardian Discovery tool program to complete the auto-provisioning of a
VoIP phone.