Setup & Configuration
HDE-VoIP Telephones
Page 7
4. Features
Standard Features on All Models
•
PoE 802.3af enabled (Power-over-Ethernet) or alternate power source.
•
Control Relay – network configurable auxiliary relay.
•
Compatible with SIP-based IP-PBX servers that comply with SIP RFC 3261.
•
Network web management.
•
Device Configuration Manager allows a significant operational list of features concerning the Auxiliary relay, LED
functions, Audio setup and others.
•
Guardian Discovery Utility makes it easy to detect, locate and launch the web based configuration screens.
•
Product self-diagnostic testing available through web interface.
•
Network adjustable volume and microphone sensitivity.
•
Network downloadable firmware.
•
Remote programming provides network management from a central location.
•
Night ringer mode.
Single Button Units:
•
Calls may be initiated from the phone or answered from the monitoring station.
•
Can be used for Emergency or Information type applications.
•
Single Push Button – depressing once automatically rings designated number to summon help. Use the Red Button
Register in the SIP configuration to store the auto-dialed number.
•
Integrated LED – provides visual confirmation of call status and connection or can be configured alternatively through
the Device Configuration.
•
Doubles as a Paging Speaker when Auto-Answer is enabled.
•
Auxiliary Relay can be programmed using several modes as required (
Note: Power limits
).
•
Night ringer mode available.
Dual Button Units with / without Telephone keypad:
•
Calls may be initiated from the phone or answered from the monitoring station.
•
Can be used for Emergency AND Information type applications with a single unit.
•
Separate button to designate for emergency and one for Information or to activate keypad (if equipped).
•
Emergency Push Button – depressing once automatically rings designated number to summon help. Use the Red
Button Register in the SIP configuration to store the auto-dialed number.
•
Information Button – Depressing once to call an information operator. Use Blue button register in the SIP
configuration to store this number.
•
Keypad – If installed, leave Blue button register BLANK. Then if pushed, a dial tone will be heard and user can direct
dial via the keypad.
•
Integrated LED’s (Qty. 2) – provides visual confirmation of call status and connection or can be configured
alternatively through the Device Configuration.
•
Doubles as a Paging Speaker when Auto-Answer is enabled.
•
Auxiliary Relay can be programmed using several modes as required (
Note: Power limits
).
•
Night ringer mode available.
