Setup & Configuration
HDE-VoIP Telephones
Page 15
Blink LEDn During Ring:
LED for respective button will flash on receipt of call during device ringing.
Blink LEDn During Night Ring
When this option is enabled, the LED will activate and flash when the device has
received a call and is playing a ringtone.
Solid LEDn During Ring:
LED activated during receipt of call and in ring mode.
Solid LEDn During Night Ring:
LED activated during receipt of call and in night ring mode.
NTP Settings
NTP Server
Use this field to set the address (in IPv4 dotted decimal notation or as a canonical
name) for the NTP Server. This field can accept canonical names of up to 64
characters in length.
Posix Timezone String
Allows the device to access a local network based time server or a global internet
server to allow the device to auto set/update the device clock. See Appendix A.
Set Time with external NTP server
on Boot
When selected, the time is set with an external the NTP server when the device
restarts.
Periodically update with time server
When selected, the time is periodically updated with the NTP server at the configured
interval below.
Time update period (in hours)
The time interval after which the device will contact the NTP server to update the time.
Enter up to 4 digits.
Set time from NTP Server
Clicking on this button will immediately set the time.
Current Time
Current Time in 24 hour format
(HHMMSS):
Allows you to input the current time manually. (6 character limit)
Current Date (MMDDYY):
Allows you to input the current date manually. (6 character limit)
Set Clock
Clicking on this button will immediately set the clock format.
Miscellaneous Settings
Disable HTTPS (NOT
recommended):
Disables the encrypted connection to the webpage. Depending on network security
enable / disable as required.
Call Termination Lockout*:
When this option is enabled, a call cannot be terminated using the Emergency Call
button.
Auto-Answer Incoming Calls
When selected, the device will automatically answer incoming calls. When Auto-
Answer Incoming Calls is disabled, the device will play a ring tone (corresponds to
Ring Tone on the Audiofiles page) out of the speaker, or the buzzer will sound until
someone presses the Call button to answer the call or the caller disconnects before
the call can be answered.
DTMF Termination Key
Key can be * or # as user chooses.
This button will play an audio test message and can be used to test the volume level.
When this button is pressed the device will record 3 seconds of audio, beep, and then
play back the recorded audio. This can be used to test the microphone gain level.
This button will activate the relay for the DTMF activation Duration (in seconds).
When this button is toggled, it will put the device into button test mode. In this mode,
the speaker will play an audio file when a button is pressed on the device. For normal
keypad input (keys 0-9), it will speak the associated file from the audio configuration
page. For the other keypad keys, (*, #, any other function keys) it will play a DTMF
tone while the button is depressed. The button press mode will time out after 60
seconds.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the device.
•
You need to reboot for changes to take effect
•
*Call termination lock out only applies to red button calls
Click on this to run the new advanced diagnostics manually.
Table 4 - Device Configuration Parameters
