Setup & Configuration
HDE-VoIP Telephones
Page 21
Remote SIP Port:
The Remote SIP Port is the port number the device will use as the
destination port when sending SIP messages for the Nightringer
extension. The default Remote SIP Port is 5060. The supported
range is 0-65536. Enter up to 5 digits.
Local SIP Port:
The Local SIP Port is the port number the device will use to receive
SIP messages for the Nightringer extension. This value cannot be
the same as the
Local SIP Port
for the primary extension. The
default Local SIP Port is 5061. The supported range is 0-65536.
Enter up to 5 digits.
Outbound Proxy:
Enter the Outbound Proxy address as an IPv4 address in dotted
decimal notation or a fully qualified domain name (FQDN). When an
IP address is configured, the device will send all SIP messages to
this IP address for the Nightringer extension. When an FQDN is
configured, the device will run DNS NAPTR, SRV, and A queries on
the FQDN to resolve an IP address to which it will send all SIP
messages for the Nightringer extension. This field can accept
entries of up to 255 characters in length.
Outbound Proxy Port:
The Outbound Proxy Port is port number used as the destination
port when sending SIP messages to the outbound proxy for the
Nightringer extension. A value of 0 will default to 5060. The
supported range is 0- 65536. Enter up to 5 digits.
User ID:
Specify the SIP User ID for the SIP server. This parameter
becomes the user portion of the SIP-URI for the device's
Nightringer extension. Enter up to 64 alphanumeric characters.
Authenticate ID:
Specify the Authenticate ID for the SIP Server. This parameter is
required for SIP registration authentication. Enter up to 64
alphanumeric characters.
Authenticate Password:
Specify the Authenticate Password for the SIP Server. This
parameter is required for SIP registration authentication. Enter up to
64 alphanumeric characters. Re-registration Interval (in seconds).
Re-registration Interval (in
seconds):
The SIP Re-registration Interval (in seconds) is the SIP Registration
lease time, also known as the expiry. The supported range is 30-
3600 seconds. Enter up to 4 digits.
Call Disconnection
Terminate Call after delay:
Automatically terminate an active call after a given delay in
seconds. A value of 0 will disable this function. Enter up to 8 digits.
Codec Selection
Force Selected Codec:
When selected, this option will allow you to force the device to
negotiate for the selected codec [PCMU(G.711, u-law),
PCMA(G.711, a-law), or G.722]. Otherwise, the device will perform
codec negotiation using the default list of supported codecs.
Codec:
Select a desired Codec in the drop-down list.
RTP Settings
RTP Port (even):
Specify the port number used for the RTP stream after establishing
a SIP call. This port number must be an even number and defaults
to 10500. The supported range is 0-65536. Enter up to 5 digits.
Jitter Buffer:
Specify the size of the jitter buffer (in milliseconds) used for SIP
calls. Valid values are 50-1000.
Dial Out Settings
Blue Button Dial out Extension:
Specify the extension the device will call when someone presses
the blue Call button. Enter up to 64 alphanumeric characters.
Blue Button Extension ID:
A Caller identification string added to outbound calls. Enter up to 64
alphanumeric characters.