CipherLab 9500CE Series Reference Manual Download Page 40

Page: 40 / 131

9500CE Reference Manual

Front Panel LEDs

Tasks

Indication of connection status

Solid red

Charging

Solid green

Charging done

Flashing (red/green)

Error occurs

Spare battery
charging status

Off Battery

not

ready

Solid green

Ethernet connected

Link / Data:

Network status
over Ethernet

Flashing

Transmitting / Receiving data

Solid green

Power on

POWER:

Cradle power

Off Power

off

Warning:

Charging error may occur due to a power failure or defected battery
contacts.

2.5.2 Communication Ports

Ports (from left to right)

Purpose

USB Client port

This port is provided for connecting to your computer for the use of
ActiveSync application.

USB Host port

This port is provided for connecting a USB device:

Keyboard

Mouse

Card reader

Storage device, such as a memory stick

Ethernet port

This port is provided for connecting to a legacy network. When
connected, the third LED (next to POWER) will become solid green.
During data transmission, the LED will be flashing.

Summary of Contents for 9500CE Series




































































































































Search results

Summary of Contents for 9500CE Series

Reviews:

Related manuals for 9500CE Series

Brands by name

Popular brands

CipherLab 9500CE Series, Reference Manual

Search results

Summary of Contents for 9500CE Series

Reviews:

Related manuals for 9500CE Series

Brands by name

Popular brands