CipherLab 9500CE Series, Reference Manual

Page: 114 / 131

104 9500CE Reference Manual
Convert UPC-E0 to
UPC-A
When enabled, the UPC-E0 reading will be expanded
into UPC-A. It will then be processed according to the
settings of UPC-A. NO (Disabled)
Convert UPC-E1 to
UPC-A
When enabled, the UPC-E1 reading will be expanded
into UPC-A. It will then be processed according to the
settings of UPC-A. NO (Disabled)
Convert EAN-8 to
EAN-13
When enabled, the EAN-8 reading will be expanded
into EAN-13. It will then be processed according to the
settings of EAN-13. NO (Disabled)
UCC Coupon
Extended Code When enabled, it will decode UPC-A barcodes starting
with digit “5”, EAN-13 barcodes starting with digit
“99”, and UPC-A/EAN-128 coupon codes.
*UPC-A, EAN-13, and EAN-128 must be enabled!
**Use “Supplemental Redundancy” to control
auto-discrimination of the EAN-128 (right half) of a
coupon code.
NO (Disabled)
Linear UPC / EAN
Decode
This applies to barcodes that contain two adjacent
blocks, such as UPC-A, EAN-8, and EAN-13.
When enabled, a barcode is transmitted only when both
the left and right blocks are successfully decoded
within one scan line.
*Enable this option when barcodes are in proximity to
each other.
NO (Disabled)
Code 128 Supported on 2D Reader Default
Enable Code 128
YES or NO YES (Enabled)
Enable EAN-128
YES or NO YES (Enabled)
Enable ISBT 128 YES or NO YES (Enabled)
Code 39 Supported on 2D Reader Default
Enable Code 39
YES or NO YES (Enabled)
Enable Trioptic Code
39
YES or NO NO (Disabled)
Convert Code 39 to
Code 32
Code 32 is a variant of Code 39 used by the Italian
pharmaceutical industry.
When enabled, it will decode Code 32 barcodes as
well.
*Code 39 must be enabled!
NO (Disabled)
Code 32 Prefix When enabled, the prefix character “A” will be added
to all Code 32 barcodes. NO (Disabled)