CipherLab 9500CE Series, Reference Manual

Page: 96 / 131

86 9500CE Reference Manual
Auto ENTER This function can spare you the trouble of pressing the
[Enter] key on the terminal to confirm each scan. It will
automatically add an ENTER character in front or to
the end of one scan.
Š No
Š Scan + ENTER (time-saving)
Š ENTER + Scan (efficient for continuous scanning)
Scan + ENTER
Auto ENTER
Character
*Auto ENTER must be enabled.
Š
None
Š Carriage Return
Š Tab
Š Space
Š
Comma
Š Semicolon
Carriage Return
Prefix Code 0~10 characters NULL
Suffix Code 0~10 characters NULL
Include Cody Type
YES or NO
NO (Disabled)
Include Cody Length
YES or NO
NO (Disabled)
Scan Mode Refer to Appendix I Comparison of Scan Modes .
Š Auto Off
Š Continuous
Š Auto Power Off
Š Alternate
Š Momentary
Š Repeat
Š Laser
Š
Test
Š Aiming
Laser mode
Barcode Decode
Timeout
1~255 (sec.) 3 seconds
Barcode Read
Redundancy
Select a desired level of reading (decoding) security.
Comprise some speed for getting more security when
necessary. For example, if “None” is selected, it only
requires one successful decoding to make the reading
valid. If “Three times” is selected, it needs to
successfully decode three more times to make the
reading valid.
Š
None
Š One time
Š Two times
Š Three times
None