CipherLab 9500CE Series, Reference Manual

Page: 19 / 131

Chapter 1 Introduction 9
ƒ Caution of Low Battery Charge
The battery pack is the only power source for the terminal to work. It also charges
the backup battery so that the data stored in SDRAM can be retained properly.
Therefore, when the main battery charge goes low, replace the battery pack with a
charged one or seat it in the cradle for charging as soon as possible. Always save
data before it is too late.
Warning: Data loss may occur with SDRAM during low battery condition. Always
save data before running out of power or keep a fresh battery for
replacement.
ƒ Battery Status Icons
Status Icons Description
Main battery is low.
Main battery is very low.
Backup battery is low.
Backup battery is very low.
Main battery is charging.
Power Properties
The system can be set to three different states to conserve power:
ƒ User Idle state
ƒ System Idle state
ƒ Suspend state
Start > Settings > Control Panel and double-tap the Power icon
1. In the Battery tab, you can always monitor the charging status.
2. Tap the Schemes tab.
3. Select the desired power scheme and options for suspending operation when not
in use. The time choices represent the amount of time that must pass before the
system will switch to the next power conservation state.