CipherLab 9500CE Series Reference Manual Download Page 54

Page: 54 / 131

9500CE Reference Manual

Using ActiveSync on PC

When connected, open the Microsoft ActiveSync window on your desktop
computer.

Click the Explorer button from the toolbar.

Navigate through file folders to find the program you desire.

Right-click the program, and then select [Create Shortcut] on the pop-up menu.

Right-click the shortcut, and then select [Cut] on the pop-up menu.

Navigate to the Programs folder (

My Device

Windows

Programs

Right-click anywhere blank on the window. Then select [Paste] on the pop-up
menu. The new program will be added to the Programs folder.

On the terminal, go to

Start

Programs

and the new program will appear now.

Note: [Create Shortcut], [Cut], and [Paste]: The same result can be performed by [Copy]

and [Paste Shortcut].

Summary of Contents for 9500CE Series




































































































































Search results

Summary of Contents for 9500CE Series

Reviews:

CipherLab 9500CE Series, Reference Manual, Page: 54 / 131

Search results

Summary of Contents for 9500CE Series

Reviews: